Welcome to MoBar
MoBar is a Draft Beer bar.
You can have the draft beer system installed in your own bar or we can bring our mobile bar MoBar.
The MoBar.
The mobile bar consists of 4 pieces and has no screws or bolts and can be assembled in a few minutes.
The MoBar is 155 cm wide, 50 cm deep and 92cm high.
It must be installed in the shade and protected from any rain.
The beer system consists of:
1 compressor box filled with tap water, 220V connection. 43 x 43 x 72 cm
1 beer tap with base, waste tray, hoses and fittings. 40 x 28 cm
1 CO2 bottle with pressure gauge and hose. 58 x 14 cm
1 beer keg connection with hoses.
The beer keg. 40 x 35 cm
Set-up
The beer system needs to be started at least 3 hours before use and preferable the day before. This to ensure that the beer is served cold.
We need access to 220V.
We need tap water to fill the system.
The system need to be turned off the day before dismantling and water need to be extracted. The ice will then melt and the melted water need to be extracted.
Access to tap water for cleaning is necessary.
As you can see on the image to the left, we can also install the DRAFT BEER system in your own bar, as long as there is room for the system.
Please see measurements above.
The bar on the image is built by MoBar.
We can also build your bar, please contact us for details.
Our mobile bar MoBar, can be set up on tiles, grass etc. The bar is stable and mounted in minutes without the use of tools. The mobile bar is made by MoBar.
We can also make one for you, if you would like to have a mobile bar that you can quickly set up and pack away.
The bar can also be made with wheels on, so it can be easily driven away.
Write to us for further information, price etc.
